Goulds Water Technology Pumps offers Grinder Retrofit Kits that are all-in-one grinder units designed to replace existing grinder pump systems. These grinder retrofit kits are designed specifically for high head residential/domestic sewage applications with a drop-in core style. The cutter systems is of an anti-roping design in which the two blade rotary cutter is threaded to the shaft. The stationary cutter ring is reversible for extended service.
The cutting system is paired with a silicon bronze semi-open, non-overloading two vane impeller. The impeller includes pump out vanes for mechanical seal protection and is balanced for smooth operation. The volute is cast iron and adaptable for a guide rail system. The motor shaft is 300 series stainless steel with short overhang for minimum shaft deflection, the mechanical seal is hardfaced silicon carbide for longer life and the upper and lower ball bearings provide precision parts positioning. The motor itself is fully submerged in an oil-filled chamber surrounded by high grade turbine oil for efficient heat dissipation, lubrication, and protection. The oil and water resistant power cord is severe duty rated.
Included with the retrofit kit:
Retrofit Kits
Junction box internally wired at the factory
Retrofit adapter with electrical connection pin plug
Stainless piping
Check valve
On/off floats and alarm
Goulds Water Technology Pumps Grinder Retrofit Kits are retrofitable with the E/One 2000 Series and Extreme series pump stations and easily installed (please see the literature below for installation instructions).
Please note that the retrofit kit should only be installed in systems with a maximum pressure of 40 psi. Pressure needs should always be considered.
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
