You may have seen a condensate pump stuck to the side of your furnace. Have you ever wondered what it does? A condensate pump acts as a miniature sump pump, collecting and pumping out all the condensation that gathers inside your HVAC system. If you do not have a condensate pump, you will have wet floors, particularly during the hot summer months. Efficient condensate pumps such as the Zoeller Condensate pumps and Hoffman Condensate pumps can ensure that your house remains dry all through the year.

How do condensate pumps work?

In air conditioning systems, warm, moist air is pulled across the cooling coils in the system, and this causes the moisture to condense into the drain pan. Air conditioning systems need to use a condensate pump to prevent the water collected from dripping onto the floor.

Condensate pumps are designed to run intermittently. These pumps come with a collection tank where the captured liquid can accumulate. A float switch activates the pump when the water reaches a designated level. The liquid is then pumped out of the tank, leaving room for more water collection. The water is usually drained out into a drain pipe. Typically, this drain pipe leads through a wall to the outside of the building or into a floor drain.

Condensate pumps prevent water from overflowing the drain pan onto the floor. They keep your floors dry and safe from water leakage issues. Condensate pumps are classified either by design or application. On the basis of their design, condensate pumps can be categorized into two fundamental pump designs, Dynamic and Positive displacement pumps. Dynamic pumps use velocity and fluid momentum to generate pump pressure. Centrifugal condensate pumps are the most commonly used ones and run on electricity. They allow large amounts of condensed water to be collected for reuse, even in high-pressure areas. The Positive displacement pumps work by expanding and contracting the pipes through which moisture travels.

If you are looking for condensate pumps, Zoeller and Hoffman are trusted brands that you should consider.

Zoeller 519-0005, Model 519, Condensate Pump

The Zoeller Model 519 is a fully automatic condensate pump that removes condensation from air conditioning systems, dehumidifiers, condensing furnaces, water coolers, and refrigeration systems. The Zoeller 519-0005 condensate pump can handle condensate up to 140°F. It can be wall-mounted and has a TDH of 20 feet. It comes with four inlet options, with a ⅜” discharge. The pump is thermally protected and comes with a check valve and an in-built safety switch. The unit comes with a stainless-steel shaft and a 6-inch power cord with ground.

Zoeller 519-0005, Model 519, Condensate Pump

 

Zoeller Pumps

Founded in 1939, Zoeller is a well-known brand for condensate pumps. It is one of the oldest pump manufacturers in the US, with a reputation for producing high-quality pumps. Zoeller Pumps has a wide range of pump products for all applications, for the standard homeowner, or for commercial applications; the Zoeller brand has it all.

Hoffman Watchman Series WCS

The Hoffman Watchman Series WCS condensate pumps come with durable 3/16” steel receivers in 6, 9, and 14 -gallon sizes. They have a bronze impeller, cast iron housing, bronze wearing ring, and carbon or ceramic mechanical seal rated 250 degrees. These pumps have externally adjustable float switches and come with in-built overload protection.

Hoffman 160010, WCS-6-20-B, Watchman Simplex Steel Receiver Condensate Unit with Float Switch

The Hoffman 160010 condensate pump is designed to return condensate to the boiler and is apt for residential, commercial, and industrial units. These pumps are made for 6,000 sq.ft. EDR systems and deliver 22 PSIG discharge pressure. The NPT inlet is at a low height allowing for easy return line piping. These pumps also come with separate NPT connections providing a secondary vent for safe operation. It is easy to install, and vertical pull-out pumps make it easy to service. It is 100% factory-tested for better durability and reliability.

Hoffman 160010 Watchman WCS Series

Hoffman 160036, WCD-30-30B-MA Watchman Cast Iron Receiver Condensate Unit with Mechanical Alternator

Hoffman 160036 pumps can be used for 6,000, 8,000 or 12,000 sq.ft. EDR systems. It is available with pumps in simplex or duplex design. Simplex models come with a double pole float switch, whereas duplex models come with a mechanical alternator. The pumps come with an NPT drain connection and have separate NPT connections that offer a separate vent for safe operation.

The Hoffman 160036 is ideal for residential and commercial use. However, it can also be used for industrial and institutional steam heating, chemical refineries, dry cleaning plants, textile mills, wood pulp paper processing plants, and manufacturing facilities.

Hoffman 160036, WCD-30-30B-MA Watchman Cast Iron Receiver Condensate Unit

Pump Products

Are you looking for the right condensate pump for your home or office? Pumpproducts.com offers some of the best brands in the market, including Zoeller condensate pumps and Hoffman condensate pumps. Their Customer Service Representatives are well-experienced and offer all the selection and sizing assistance that you need. To look at their extensive collection of condensate pumps, visit their website today.