BLOG

Zoeller's Qwik Jon Ultima series of toilet grinder pumps are designed to handle a toilet, sink, tub, and/or shower, even when gravity drains are not an option. With multiple model configurations, this system provides the flexibility to install a bathroom almost anywhere. This compact system is preassembled for easy installation and low cost. With no need to destroy or elevate the floor, the grinder tank can be installed free-standing or behind the wall. This series is designed with convenient auxiliary inlets to accommodate a toilet, lavatory, bathtub, and/or shower in a basement, cottage, tool shed, holiday home, etc. A powerful 1/2 HP motor delivers almost twice the shut-off head of the leading competitor. By utilizing grinder technology instead of a macerator, this system is engineered to never need cleaning and to remain maintenance-free for the life of the system. A “never dull” cutter assembly of hardened steel provides over 70,000 cuts per minute.

• Contains 1/2 HP (0.7 kW) mini grinder pump - not a macerator
• Preassembled pump and tank for easy installation
• Model 202 includes a comfort-height, ADA-compliant, Zoeller rear-discharge toilet with elongated bowl, or you can use Model 203 (60 Hz only) Ultima with a variety of rear outlet toilet styles
• Can be installed either free-standing or behind a wall with the 2" MPT or 1-1/2" internal slip side inlets
• No need to destroy concrete floors
• No need to elevate floor
• Designed for a full or a half bathroom, this system can accommodate a toilet, lavatory, bathtub, and/or shower.
• Perfect for basements, cabins, workshops, garages, additions, pool houses, etc.
• Reduces construction costs
• 1” discharge (can be reduced to 3/4” to replace existing systems)
• Pumps any direction
• Patent Nos. 7,203,976; 2,512,023; 9,352,327; 8,562,287
• 1.6 GPF (6.1 LPF)
• Hardware to mount toilet to floor sold by others

Qwik Jon Ultima features

• Non-corrosive, engineered thermoplastic, mini grinder pump
• Premium grinder blade: Investment-cast 440 stainless steel cutter plate is engineered to handle cloth, latex, and other hard to grind materials. Tri-Slice^® Cutter Technology - three independent cutting channels provide over 250,000 cuter per minute.
• Pump 100% factory tested after assembly
• Automatic reset thermal overload protected
• Hardened stainless steel cutter and disc
• Carbon/ceramic mechanical shaft seal
• Upper and lower ball bearing running in a bath of oil
• All stainless steel hardware
• ABS tank with 2” MPT of 1-1/2” slip side inlets
• Preassembled with preset piggyback vertical float switch
• Two models available, complete with toilet (model 202) or tank only adaptable to standard rear outlet toilets (model 203)

This system includes

• Model 202: tank, mini grinder pump, and a comfort height, ADA-compliant toilet with elongated bowl
• Model 203: tank and mini-grinder pump (standard rear outlet toilet with a discharge height of 4" (10 cm) from floor to centerline must be purchased separately)

Mini-grinder pump features

• Automatic level control switch
• Thermal overload protected motor
• Stainless steel screws, bolts, and handle
• Non-clogging vortex impeller
• UL listed, 3-wire, neoprene 9' (3 m) cord, and plug
• Maximum temperature: 130 °F (54 °C)

Tank features

• Durable ABS tank with white finish
• Light-weight
• Built-in check valve

Items included

• Comfort-height, ADA-compliant toilet with elongated bowl (model 202 only)
• Tank, lid, and gasket
• 1/2 HP mini grinder pump
• Back-flow device (check local codes)
• 1” discharge and 1-1/2” vent
• Extension kit (model 203)
• Hardware pack
• Installation instructions
• Model 202 shipping weight: 121 lbs (55 kg)
• Model 203 shipping weight: 37 lbs (17 kg)

Items needed by the installer

• Supply fittings and waste pipe
• Toilet (model 203 only)
• Toilet seat
• Electrical source with ground fault interrupter (GFCI) protected receptacle
• Water supply
• Tools

Model Comparison Chart

Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.